Huawei AR150 series - Maintaining Ipv6; Resetting Ipv6

Sent packets:
total: 0
total(64bit high-capacity counter): 0
Run the display ipv6 socket command. If the related socket information is displayed, it means
that the configuration succeeds.
<Huawei> display ipv6 socket
SOCK_STREAM:
Task = VTYD(14), socketid = 4, Proto = 6,
LA = ::->22, FA = ::->0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_REUSEPORT SO_SENDVPNID,
socket state = SS_PRIV SS_ASYNC
SOCK_DGRAM:
Task = VTYD(14), socketid = 3, Proto = 6,
LA = ::->23, FA = ::->0,
sndbuf = 8192, rcvbuf = 8192, sb_cc = 0, rb_cc = 0,
socket option = SO_ACCEPTCONN SO_REUSEPORT SO_SENDVPNID,
socket state = SS_PRIV SS_ASYNC
SOCK_RAW:
3.8 Maintaining IPv6
This section describes how to maintain IPv6. Detailed operations include deleting information
about IPv6 operation and monitoring IPv6 operation.
3.8.1 Resetting IPv6
This section describes clearance of information about IPv6 operation through the reset command.
Context
CAUTION
IPv6 statistics cannot restore after you clear it. So, confirm the action before you use the
command.
Procedure
l Run the reset ipv6 statistics command in the user view to clear statistics of processing
IPv6 packets after you confirm it.
l Run the reset ipv6 pathmtu { all | dynamic | static } command in the user view to clear
PMTU entries in the cache after you confirm it.
l Run the reset ipv6 neighbors { all | dynamic | static | vid vlan-id [ interface-type interface-
number] | interface-type interface-number [ dynamic | static ] } command in the user view
to clear IPv6 neighbor entries in the cache after you confirm it.
l Run the reset ipv6 address-policy command in the user view to clear address selection
policy entries.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 3 Basic IPv6 Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
75