EasyManua.ls Logo

Huawei AR150 series - Configuring a DHCP Server Based on a Global Address Pool; Establishing the Configuration Task

Huawei AR150 series
221 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AR150/200 Functioning as a DHCP/BOOTP Client
The AR150/200 supports the DHCP/BOOTP client function. After a Layer 3 interface of the
AR150/200 is configured as a DHCP/BOOTP client, the interface can dynamically obtain an IP
address and other configurations from a DHCP server by using the DHCP/BOOTP protocol.
This facilitates configuration and centralized management.
DHCP Rate Limit
The AR150/200 supports DHCP rate limit. This protects the DHCP protocol stack against attacks
by sending a large number of DHCP packets.
6.3 Configuring a DHCP Server Based on a Global Address
Pool
After a DHCP server based on a global address pool is configured, all online users of the server
can obtain IP addresses from this address pool.
6.3.1 Establishing the Configuration Task
Before configuring a DHCP server based on a global address pool, familiarize yourself with the
applicable environment, complete the pre-configuration tasks, and obtain the data required for
the configuration. This will help you complete the configuration task quickly and accurately.
Applicable Environment
When the AR150/200 functions as a DHCP server, you can configure a global address pool on
the AR150/200. The AR150/200 then allocates IP addresses and configuration parameters to
clients from the global address pool.
The global address pool applies to the following scenarios:
DHCP clients and the AR150/200 used as a DHCP server are on the same network segment.
DHCP clients can obtain IP addresses and other configuration parameters from a global address
pool. Figure 6-1 shows the networking.
Figure 6-1 Application scenario 1 of a global address pool
DHCP Client
DHCP Server
DHCP clients and the AR150/200 functioning as a DHCP server are on different network
segments. DHCP clients can obtain IP addresses and other configuration parameters from a
global address pool through a DHCP relay agent. Figure 6-2 shows the networking.
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 6 DHCP Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
128

Table of Contents

Other manuals for Huawei AR150 series

Related product manuals