sec
Input peak rate 1928 bits/sec,Record time: 2007-11-30
14:57:22
Output peak rate 7384 bits/sec,Record time: 2007-11-30
10:13:15
Input: 833 packets, 72696
bytes
Unicast: 59, Multicast:
757
Broadcast: 17, Jumbo:
0
Discard: 0, Total Error: 0
# Run the display current-configuration command on Router B. You can view the
configurations of the BOOTP client function.
[RouterB] display current-configuration
...
#
interface Ethernet1/0/0
ip address bootp-alloc
#
...
# Run the display interface command on Router B after the interface obtains an IP address.
You can view the IP address of the interface.
[RouterB] display interface ethernet 1/0/0
Ethernet1/0/0 current state : DOWN
Line protocol current state :
DOWN
Description:HUAWEI, Huawei Series, Ethernet1/0/0 Interface
Route Port,The Maximum Transmit Unit is
1500
Internet Address is allocated by DHCP,10.1.1.22/24
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 00e0-
fc11-000a
Last physical up time : 2007-12-01
10:48:50
Last physical down time : 2007-12-01
10:52:56
Current system time: 2007-12-01
16:52:01
Port Mode: COMMON
COPPER
Speed : 100, Loopback:
NONE
Duplex: FULL, Negotiation:
ENABLE
Mdi :
AUTO
Last 300 seconds input rate 0 bits/sec, 0 packets/
sec
Last 300 seconds output rate 0 bits/sec, 0 packets/
sec
Input peak rate 1928 bits/sec,Record time: 2007-11-30
14:57:22
Output peak rate 7384 bits/sec,Record time: 2007-11-30
10:13:15
Input: 833 packets, 72696
bytes
Unicast: 59, Multicast:
757
Broadcast: 17, Jumbo:
0
Discard: 0, Total Error: 0
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 6 DHCP Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
170