# Ping RouterA. You can see that RouterB does not send ICMP redirection packets. There is no
information about ICMP redirection packets in the debugging command output.
[RouterA] ping 2.2.2.2
PING 2.2.2.2: 56 data bytes, press CTRL_C to break
Reply from 2.2.2.2: bytes=56 Sequence=1 ttl=255 time=3 ms
Reply from 2.2.2.2: bytes=56 Sequence=2 ttl=255 time=3 ms
Reply from 2.2.2.2: bytes=56 Sequence=3 ttl=255 time=3 ms
Reply from 2.2.2.2: bytes=56 Sequence=4 ttl=255 time=3 ms
Reply from 2.2.2.2: bytes=56 Sequence=5 ttl=255 time=3 ms
--- 2.2.2.2 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 3/3/3 ms
----End
Configuration Files
l Configuration file of RouterA
#
sysname RouterA
#
interface Ethernet1/0/0
ip address 1.1.1.1 255.255.255.0
#
ip route-static 2.2.2.0 255.255.255.0 1.1.1.2
#
return
l Configuration file of RouterB
#
sysname RouterB
#
interface Ethernet1/0/0
ip address 1.1.1.2 255.255.255.0
undo icmp redirect send
#
ip route-static 2.2.2.0 255.255.255.0 1.1.1.1
#
return
l Configuration file of RouterC
#
sysname RouterC
#
interface Ethernet1/0/0
ip address 2.2.2.2 255.255.255.0
#
return
Huawei AR150&200 Series Enterprise Routers
Configuration Guide - IP Service 7 IP Performance Configuration
Issue 02 (2012-03-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
191
To Next Page
Loading...
