Huawei CX600-X2-M Series - Page 114

Indicator Description
LINK/ACT
(green)
If the indicator is steady on, the link is normal.
If the indicator blinks, data is being transmitted.
If the indicator is off, the link is Down.
Interface Attributes
Table 4-24 lists the attributes of the interfaces on the 8-Port 100/1000Base-X-SFP Physical
Interface Card(PIC).
Table 4-24 Attributes of the interfaces on the 8-Port 100/1000Base-X-SFP Physical Interface
Card(PIC)
Attribute Value
Connector LC/PC
Interface attributes Determined by the selected SFP optical module
Working mode Full-duplex
Standard
compliance
IEEE 802.3-2002
Frame format Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
Network protocol IP
Table 4-25 Attributes of the 100 M SFP optical module
Attribute Value
Maximum
transmission
distance
2 km (1.24
mi.)
15 km (9.32
mi.)
40 km (24.86
mi.)
80 km (49.71
mi.)
Center wavelength 1310 nm 1310 nm 1310 nm 1550 nm
Minimum output
power
-19.0 dBm -15.0 dBm -5.0 dBm -5.0 dBm
Maximum output
power
-14.0 dBm -8.0 dBm 0 dBm 0 dBm
Receiver sensitivity -30.0 dBm -31.0 dBm -37.0 dBm -37.0 dBm
Overload optical
power
-14.0 dBm -8.0 dBm -10.0 dBm -10.0 dBm
Fiber type Multimode Single-mode Single-mode Single-mode
HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description 4 Boards
Issue 03 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
104