Table 4-44 Interface attributes of the 32-Port E1 Physical Interface Card(PIC, 120ohm)
Attribute Description
Connector type Anea 96, 120 ohm
Nominal bit rate 2048 kbit/s
Interface
impedance
120 ohm
Interface code HDB3
Pulse waveform of
the output
interface
Compliant with ITU-T G0.703
Attenuation (dB)
of the input
interface at a point
with the frequency
of 1024 kHz
0 to 6
Immunity of the
input interface
Compliant with ITU-T G0.703
Input jitter
tolerance
Compliant with ITU-T G.823
Output jitter Compliant with ITU-T G.823
Technical Specifications
Table 4-45 shows the technical specifications of the 32-Port E1 Physical Interface Card(PIC,
120ohm).
Table 4-45 Technical specifications of the 32-Port E1 Physical Interface Card(PIC, 120ohm)
Item Specification
Silkscreen of the board
name
32xE1-75
Typical power
consumption
13.5 W
Heat dissipation 43.8 BTU/hour
Weight 0.45 kg ( 0.99 lb )
Dimensions (H x W x D) 20 mm x 194 mm x 226 mm (0.79 in. x 7.64 in. x 8.90 in.)
Connector type Anea 96, 120 ohm
HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description 4 Boards
Issue 03 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
116
To Next Page
Loading...
