Panel Description
Table 4-55 describes the indicators on the 4-Port OC-3c/STM-1c POS-SFP Physical Interface
Card(FIC).
Table 4-55 Indicators on the 4-Port OC-3c/STM-1c POS-SFP Physical Interface Card(FIC)
Indicator Description
STAT If the indicator is steady green, the 4-Port OC-3c/STM-1c POS-SFP
Physical Interface Card(FIC) is working properly.
If the indicator is steady off, the 4-Port OC-3c/STM-1c POS-SFP
Physical Interface Card(FIC) does not register or is powered off.
If the indicator is steady red, the 4-Port OC-3c/STM-1c POS-SFP
Physical Interface Card(FIC) has hardware faults.
If the indicator is steady yellow, no logic is loaded to the 4-Port OC-3c/
STM-1c POS-SFP Physical Interface Card(FIC).
LINK/ACT
(green)
If the indicator is steady on, the link is working properly.
If the indicator blinks, data is being transmitted.
If the indicator is steady off, the link is not working properly.
Interface attributes
Table 4-56 lists the interface attributes of the 4-Port OC-3c/STM-1c POS-SFP Physical Interface
Card(FIC).
Table 4-56 Interface attributes of the 4-Port OC-3c/STM-1c POS-SFP Physical Interface Card
(FIC)
Attribute Description
Connector type LC/PC
Interface attribute Determined by the selected SFP optical module
Working mode Full-duplex
Link protocol PPP, HDLC
Supported
network protocol
IP
HUAWEI CX600-X1-M/CX600-X2-M Series Metro
Services Platform
Hardware Description
4 Boards
Issue 03 (2014-04-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
123
To Next Page
Loading...
