Figure 5-13 Adding a mobile number
Click Test to check whether the added mobile phone number is available. If it is available,
Successfully to send the test short message. is displayed. If it is unavailable, Failed to send
the test short message. is displayed. Check whether the mobile phone number is correctly set.
Step 5 Set the alarm notication delay parameter and the new alarm notication
parameter.
Figure 5-14 Setting the alarm
notication parameters
FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S) 5 Power-On Commissioning
Issue 02 (2021-06-30) Copyright © Huawei Technologies Co., Ltd. 131
To Next Page
Loading...
