Related
Operatio
ns
Procedure
Delete
modules
You can delete one module or multiple modules in batches on the
current page.
NOTE
If a module contains subdevices, you cannot delete it. You can delete the
module only after you delete subdevices in the module.
● Delete one module.
1. Right-click Modular and click Delete under .
2. In the displayed Conrm dialog box, click Yes.
● Delete multiple modules in batches.
1. Click
on the toolbar. The Batch Delete dialog box is
displayed.
Figure 5-20 Deleting multiple modules in batches
2. In the lter box, set lter criteria to lter required modules.
3. Select the smart module to be deleted and click Delete.
4. In the displayed
Conrm dialog box, click Yes.
Add tools
1. Select the module for which you want to add a pillar.
2. In the lower-left corner of the current page, click Tool.
3. Select the Pillar component to be added and drag it to the
planning conguration area.
NOTE
After the component is added, you can set attributes for the component
in the Component Info list in the right pane. The system automatically
displays values for Parent Name and Control Type, and you do not need
to manually set them, you only need to set Name.
4. In the upper area of the current page, click .
FusionModule500 Smart Mini Data Center
User Manual (Philippines, FusionModule500-
SU61A12S) 5 Power-On Commissioning
Issue 02 (2021-06-30) Copyright © Huawei Technologies Co., Ltd. 146
To Next Page
Loading...
Need help?
General