The Boot Type Order screen is displayed.
NOTE
The default boot order is as follows: Hard Disk Drive, CD/DVD-ROM Drive, PXE, and Others.
16 Select a boot option and press F5 or F6 to change the boot order.
– Press F5 to move a boot option down.
– Press F6 to move a boot option up.
NOTE
The server will boot in the order displayed.
17 Press F10.
The Exit Saving changes? dialog box is displayed.
18 Select Yes and press Enter.
Set the NIC PXE priority.
NOTE
If there are multiple boot devices of the same type, you can configure the boot order. The following uses PXE
as an example. For details about setting other types of devices as boot options, see the HUAWEI Server
Purely Platform BIOS Parameter Reference.
19 Choose Advanced > PXE Configuration, and press Enter.
The PXE Configuration screen is displayed, as shown in Figure 5-41.
NOTE
The PXE Configuration screen provides PXE settings for two network ports and displays their
MAC addresses.
Figure 5-41 PXE Configuration
20 Select the network port to be configured and press Enter.
FusionServer G5500 Server
User Guide
5 Configuring the G5500
Issue 02 (2017-12-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
118
To Next Page
Loading...
