Huawei FusionServer Pro XH321 V5 - Installing the Air Duct

Step 2 Remove the server node.
For details, see 8.3.3 Removing an XH321 V5.
Step 3 Place the server node on the ESD workstation.
Step 4 Determine the position of the air duct.
Step 5 Lift the air duct.
Figure 8-62 Removing the air duct
Step 6
Place the removed component in an ESD bag.
NO TICE
Place only one component in an ESD bag.
----End
8.4.24 Installing the Air Duct
Procedure
Step 1 Power o the server node.
For details, see 8.3.2 Power-O Procedure.
Step 2 Remove the server node.
For details, see 8.3.3 Removing an XH321 V5.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 8 Parts Replacement
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 96