Huawei FusionServer Pro XH321 V5 - Accessing the System BIOS

Step 7 Select Disabled and press Enter.
Step 8 Press F10.
The Save Changes&Exit dialog box is displayed.
Step 9 Select Yes and press Enter to save the settings.
The server automatically restarts for the settings to take eect.
----End
10.6 Accessing the BIOS
10.6.1 Accessing the BIOS (V3XX or Earlier)
Procedure
Step 1 Log in to the desktop of the server node.
For details, see 10.3 Logging In to the Desktop of a Server.
Step 2 On the Remote Virtual Console, click
on the menu bar.
Step 3 Choose Forced System Reset or Forced Power Cycle.
The Select an Option dialog box is displayed.
NO TICE
● A forced restart or power cycle may cause data loss or program damage.
● Before performing a forced restart or power cycle, ensure that no service
interruption risk exists.
Step 4 Click Yes.
The server node starts to be forcibly restarted or power cycled.
Step 5 During the restart, press Delete or F4 when the information shown in Figure
10-35 is displayed.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 10 Common Operations
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 144