Huawei FusionServer Pro XH321 V5 - Installing a Pcie Card

8.4.20 Installing a PCIe Card
Procedure
Step 1 Power o the server node.
For details, see 8.3.2 Power-O Procedure.
Step 2 Remove the server node.
For details, see 8.3.3 Removing an XH321 V5.
Step 3 Place the server node on the ESD workstation.
Step 4 Take the component out of its ESD bag.
Step 5 Determine the position of the PCIe card.
Figure 8-56 Position of the PCIe card
Step 6 Hold the PCIe riser module and insert the PCIe card module into the PCIe riser
module in the arrow direction. See (1) in Figure 8-57.
Figure 8-57 Installing a PCIe card
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 8 Parts Replacement
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 89