Figure 8-47 Removing a TPM
Step 8 Remove M.2 SSDs.
For details, see 8.4.1 Removing an M.2 SSD.
Step 9 Place the removed component in an ESD bag.
Place only one component in an ESD bag.
----End
8.4.16 Installing the TPM
Procedure
Step 1 Power o the server node.
For details, see 8.3.2
Power-O Procedure.
Step 2 Remove the server node.
For details, see 8.3.3 Removing an XH321 V5.
Step 3 Place the server node on the ESD workstation.
Step 4 Remove the air duct.
For details, see 8.4.23 Removing the Air Duct.
Step 5 Determine the position of the TPM.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 8 Parts Replacement
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 81
To Next Page
Loading...
