Figure 8-46 Position of the TPM
Step 6 Remove the PCIe riser module.
For details, see 8.4.21 Removing a PCIe Riser Module.
Step 7 Remove the TPM.
1. Remove the cables from the TPM.
For details, see 7.1 TPM Cabling.
2. Release the buckle on the TPM in the arrow direction, and push the TPM
backwards until it cannot move forward. See (1) in Figure 8-47.
3. Remove the TPM from the dowel pins on the side wall of the server node and
take it out upwards. See (2) in Figure 8-47.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 8 Parts Replacement
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 80
To Next Page