Huawei FusionServer Pro XH321 V5 - Removing an M.2 FRU on the Avago Sas3004 Imr Pcie RAID Controller Card

Step 2 Remove the server node.
For details, see 8.3.3 Removing an XH321 V5.
Step 3 Place the server node on the ESD workstation.
Step 4 Take the component out of its ESD bag.
Step 5 Determine the position of the Avago SAS3004iMR RAID controller card.
Step 6 Install the Avago SAS3004iMR RAID controller card.
For details, see 8.4.20 Installing a PCIe Card.
Step 7 Install the M.2 FRU on the Avago SAS3004iMR RAID controller card.
For details, see 8.4.10 Installing an M.2 FRU on the Avago SAS3004iMR PCIe
RAID Controller Card.
Step 8 Install the server node.
For details, see 8.3.4 Installing an XH321 V5.
Step 9 Power on the server node.
For details, see 8.3.1 Power-On Procedure.
----End
8.4.9 Removing an M.2 FRU on the Avago SAS3004iMR PCIe
RAID Controller Card
The M.2 FRU on the Avago SAS3004iMR RAID controller card is hot swappable.
NO TE
● The M.2 FRU on the Avago SAS3004iMR RAID controller card is hot swappable:
● If the drive to be removed has no operating system installed, you can remove it
without powering o the server node.
● If the drive to be removed has the operating system installed and is in a RAID array
with redundancy, and the removal does not cause a RAID array fault, you can
remove it without powering o the server node.
● If the drive to be removed has the operating system installed but it is not in a RAID
array or it is in a RAID array without redundancy (for example, RAID 0), power o
the server node before removing it.
● The M.2 FRU on the Avago SAS3004iMR RAID controller card supports RAID
conguration:
● If the drive to be removed is not in a RAID array or is in a RAID array without
redundancy (for example, RAID 0), back up the data on the drive before removing
it.
● If the drive to be removed is in a RAID array with redundancy and the removal
does not cause a RAID array fault, you do not need to back up data before
removing it.
Procedure
Step 1 Determine the positions and slots of the M.2 FRUs on the Avago SAS3004iMR
RAID controller card.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 8 Parts Replacement
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 62