Huawei FusionServer Pro XH321 V5 - Removing the Battery

The TPM settings take eect after the server is restarted.
----End
8.4.17 Removing the Battery
Procedure
Step 1 Conrm the BIOS conguration.
CA UTION
After the battery is replaced, the original BIOS conguration will be lost. If the
current BIOS parameters have been adjusted based on service scenarios, ensure
that the parameter
conguration is the same as that before the battery is replaced
to ensure that services are not
aected after the battery is replaced.
Step 2 Export the BIOS conguration le.
For details, see FusionServer Pro X6000 Server iBMC User Guide .
NO TE
● The iBMC supports import and export of conguration les from version 2.32.
● The BIOS conguration le exported from the iBMC can be directly imported after the
battery is replaced. If the exported
conguration le contains ciphertext, change the
ciphertext to plaintext and delete the comment tags from the line. For details about
how to import and export congurations, see FusionServer Pro X6000 Server iBMC
User Guide .
● The BIOS conguration le exported from the iBMC contains the conguration list. For
details, see
"Conguration File Description" in FusionServer Pro X6000 Server iBMC
User Guide .
● If the iBMC cannot be logged in to or the BIOS conguration le is not exported before
the battery is replaced, you need to manually recongure the BIOS after replacing the
battery.
Step 3 Power o the server node.
For details, see 8.3.2
Power-O Procedure.
Step 4 Remove the server node.
For details, see 8.3.3 Removing an XH321 V5.
Step 5 Place the server node on the ESD workstation.
Step 6 Determine the position of the battery.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 8 Parts Replacement
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 84