Figure 8-48 Position of the TPM
Step 6 Take the component out of its ESD bag.
Step 7 Remove the PCIe riser module.
For details, see 8.4.21 Removing a PCIe Riser Module.
Step 8 Install M.2 SSDs.
For details, see 8.4.2 Installing an M.2 SSD.
Step 9 Install the TPM.
1. Align the TPM with the dowel pins on the side wall of the server node, and
insert the TPM in the arrow direction.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 8 Parts Replacement
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 82
To Next Page
Loading...
