Procedure
Step 1 Set an IP address and subnet mask or add route information for the PC to
communicate with the server.
Step 2 On the PC, double-click PuTTY.exe.
The PuTTY
Conguration window is displayed.
Figure 10-33 PuTTY Conguration
Step 3 In the navigation tree, choose Session.
Step 4 Set the login parameters.
The parameters are described as follows:
● Host Name (or IP address): Enter the IP address of the server to be accessed,
for example, 191.100.34.32.
● Port: Retain the default value 22.
● Connection type: Retain the default value SSH.
● Close window on exit: Retain the default value Only on clean exit.
Congure Host Name and Saved Sessions, and click Save. You can double-click the saved
record in Saved Sessions to log in to the server next time.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 10 Common Operations
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 140
To Next Page
Loading...
