Step 4 In the navigation tree, choose Session.
Step 5 Set Connection type to Serial and Close window on exit to Only on clean exit.
Set Saved Sessions and click Save. You can double-click the saved record in Saved Sessions
to log in to the server next time.
Figure 10-34 PuTTY Conguration
Step 6 Click Open.
The PuTTY screen is displayed. Then the message "login as:" is displayed,
prompting you to enter a user name.
If this is your rst login to the server, the PuTTY Security Alert dialog box is displayed.
Click Yes to proceed.
Step 7 Enter the user name and password.
If the login is successful, the server host name is displayed on the left of the
prompt.
----End
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 10 Common Operations
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 142
To Next Page
Loading...
