Huawei FusionServer Pro XH321 V5 - Page 16

Indicator and Button Description
Table 2-1 Indicators and buttons on the front panel
Silkscreen Indicator/
Button
Description
Power
button/
indicator
Power indicator:
● O: The device is not powered on.
● Steady green: The device is powered on.
● Blinking yellow: The iBMC is starting. The
power button is locked and cannot be
pressed. The iBMC is started in about 1
minute, and then the power indicator is
steady yellow.
● Steady yellow: The device is standby.
Power button:
● When the device is powered on, you can
press this button to gracefully shut down
the OS.
NOTE
For
dierent OSs, you may need to shut down
the OS as prompted.
● When the device is powered on, holding
down this button for 6 seconds will forcibly
power
o the device.
● When the power indicator is steady yellow,
you can press this button to power on the
device.
Health status
indicator
● O: The device is powered o or is faulty.
● Blinking red at 1 Hz: A major alarm has
been generated on the system.
● Blinking red at 5 Hz: A critical alarm has
been generated on the system.
● Steady green: The device is operating
properly.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 2 Hardware Description
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 7