Huawei FusionServer Pro XH321 V5 - Page 35

Category Specications
Network Supports LOM.
● Supports two 10GE optical ports and two GE
electrical ports via the NIC chip integrated on the
mainboard.
● The LOM ports support NC-SI, WOL, and PXE.
NOTE
● The electrical ports provided by LOMs and PCIe NICs
cannot be connected to PoE devices (such as a switch with
PoE enabled). Connecting such an electrical port to a PoE
device may cause link communication failure or even
damage the NIC.
● Forcibly powering o a server will cause intermittent NC-SI
disconnection and disable the WOL function of the LOM
ports. To restore the NC-SI connection, refresh the iBMC
WebUI.
I/O expansion 3 PCIe 3.0 slots:
● One slot dedicated for a screw-in RAID controller
card and two for standard PCIe cards.
For details, see 2.5.2 PCIe Slots and 2.5.3 PCIe Slot
Description.
● Support Huawei proprietary PCIe SSD cards to
bolster I/O performance for applications such as
searching, caching, and download services.
NOTE
The preceding information is for reference only. Use the
Computing Product Compatibility Checker to obtain
specic
information.
Ports Supports a variety of ports.
● Ports on the front panel:
– One universal connector port
– One system management port
– Two GE electrical ports
– Two 10GE optical ports
● Built-in ports:
– Two SATADOM ports
Video card An SM750 video chip with 32 MB display memory is
integrated on the mainboard. The maximum display
resolution is 1920 x 1200 at 60 Hz with 16 M colors.
NOTE
The integrated video card can provide the maximum display
resolution (1920 x 1200) only after the video card driver
matching the operating system version is installed. Otherwise,
only the default resolution supported by the operating system
is provided.
FusionServer Pro XH321 V5 Server Node
Maintenance and Service Guide 3 Product Specications
Issue 17 (2021-03-09) Copyright © Huawei Technologies Co., Ltd. 26