● Keep irrelevant people away from the equipment. Only operators are allowed
to access the equipment.
● Use insulated tools or tools with insulated handles.
● All cable holes should be sealed. Seal the used cable holes with restop putty.
● Do not obscure, damage, or block any warning labels on the equipment.
● When installing the equipment, use a torque wrench with a proper range to
tighten the screws according to the instructions.
● Ensure that power is
o during installation.
● Repaint any scratched surfaces caused during equipment transportation or
installation in a timely manner. Scratched equipment should not be exposed
to an outdoor environment for extended periods.
● Secure the device to the ground or other stable objects before operation.
● Do not use water to clean electrical components inside or outside of a
cabinet.
● Do not change the structure or installation sequence of equipment without
permission.
● Do not touch a running fan with your ngers, components, screws, tools, or
boards before the fan is powered o or stops running.
Personal safety
● If there is a likelihood of personal injury or equipment damage during
operations, immediately stop, report the case to the supervisor, and take
feasible protective measures.
● Use tools correctly to prevent personal injury or equipment damage.
● Do not touch the energized equipment, as the enclosure is hot.
● Do not power on the equipment before it is installed or conrmed by
professionals.
1.2 Personnel Requirements
● Understand the composition and working principles of the ESS as well as
relevant local standards.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 1 Safety Information
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 3
To Next Page
Loading...