Parameter Description
Password Set the login password as prompted.
– Protect the password by changing it periodically, and keep it secure. If you lose the
password, the device must be restored to its factory settings. Huawei will not be
held liable for any losses resulting from improper password management.
– You will be locked out for 10 minutes after
ve failed password attempts in ve
minutes.
– A dialog box with recent login information is displayed after login. Click OK.
----End
Follow-up Procedure
If any page is blank or a menu cannot be accessed after you log in to the WebUI,
clear the cache, refresh the page, or log in again.
8.2 Commissioning Using Deployment Wizard
Procedure
Step 1 Log in as admin to access the deployment wizard page.
Step 2 Set corresponding parameters as prompted. For details, see Help on the page.
During parameter setting, click Previous, Next, or Skip as required.
1. Complete settings on the Basic parameters page.
Figure 8-5 Setting basic parameters
2. After Huawei devices are connected, click Search for Device to check cable
connections, identify the topology, and rectify alarms.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 8 SmartLogger Web-based Deployment
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 121
To Next Page
Loading...