Three types of copper bars are included with the equipment and are identied by the
silkscreens A, B, and C printed on the front.
Figure 4-14 Installing copper bars between battery packs
When installing copper bar C, keep away from communications cables and fan
power cables of battery packs to prevent cables from being squeezed.
Step 4 After installing the copper bars, close the battery pack cover.
Step 5 Close the battery cabin door.
----End
4.3.3 Filling the Fire Cylinder with Extinguishant
This step applies only to the scenario where re cylinders are used.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 4 Installation
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 83
To Next Page
Loading...