Figure 5-12 Connecting the ve-core AC input power cable (including the ground
cable and the neutral wire)
(1) Screw assembly (2) Spring washer (3) Large washer (optional)
(4) Wiring terminals (5) Copper bar (6) Flat washer
Step 4 Use restop putty to seal the cable holes at the bottom.
----End
When connecting AC input power cables, ensure that the cables are not damaged
or disconnected. Ensure that the neutral wire is securely connected. Otherwise, AC
power devices in the system may be damaged.
5.5 Installing Signal Cables
5.5.1 Installing FE Communications Cables
Step 1 Remove the protective cover.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 5 Installing Cables
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 97
To Next Page
Loading...