● When moving the equipment by hand, wear protective gloves to prevent
injury.
● Do not scratch the equipment surface or damage components and cables
when moving the equipment.
● When transporting the equipment using a forklift truck, ensure that the forks
are properly positioned so that the equipment does not topple. Before moving
the equipment, secure it to the forklift truck using ropes. When moving the
equipment, assign dedicated personnel to take care of it.
● Move the equipment with caution. Any bumping or falling may damage the
equipment.
1.7 Battery Safety
Basic Requirements
Before operating batteries, carefully read the safety precautions for battery
handling and master the correct battery connection methods.
● Do not expose batteries at high temperatures or around heat-generating
sources, such as sunlight, re sources, transformers, and heaters. The battery
may cause a
re if overheated.
● To avoid leakage, overheating, or
re, do not disassemble, alter, or damage
batteries. For example, do not insert foreign objects into batteries or place
batteries in water or other liquids.
● Batteries must be stored indoor and separated from other materials.
● Wear goggles, rubber gloves, and protective clothing to avoid damage caused
by electrolyte in the case of electrolyte overow. If a battery overows,
protect the skin or eyes from the leaking liquid. If the skin or eyes come in
contact with the leaking liquid, wash it immediately with clean water and go
to the hospital for medical treatment.
● Use dedicated insulation tools to install the equipment and connect cables.
● Move batteries in the required direction. Do not place a battery upside down
or tilt it.
● Keep the battery loop disconnected during installation and maintenance.
● Use batteries of specied models. Using batteries of other models may
damage the batteries.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 1 Safety Information
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 11
To Next Page
Loading...