Figure A-8 Checking alarms
----End
A.2.5 Clearing Alarms
You can clear all active and historical alarms for the selected device and re-collect
alarm data.
Procedure
Step 1 Choose Maintenance > Device Mgmt. > Clear Alarm.
Figure A-9 Clearing alarms
Step 2 Select the name of the device whose alarms are to be cleared, click Submit, and
choose All, Locally synchronized alarms, or Alarms stored on devices to clear
alarms.
----End
If alarms are cleared for the CMU, you must reset alarms on the management system.
Otherwise, the SmartLogger cannot obtain the alarm information collected by the CMU
after the alarms are cleared.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual A Operations on the CMU WebUI
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 179
To Next Page
Loading...