Huawei LUNA2000-2.0MWH-1H0 - Installing the ESS

Personal Protective Equipment (PPE)
Safety gloves Safety goggles Anti-dust mask
Safety shoes
Reective vest
Safety helmet
Medical kit
-
4.1.2 Installation Environment Check
Check the site requirements one by one, and start installation only after all
requirements are met. The Company will not be liable for any consequences in the
case that the installation environment does not meet the requirements.
NO TE
Mark the safe zone: Use red caution belts to delimit a safe zone, clean up obstacles in the
safe zone, and place construction signs and warning signs in prominent positions.
4.2 Installing the ESS
4.2.1 Determining the Installation Position of the ESS
Prerequisites
● The site requirements are met.
● Check and adjust the height of the concrete platforms to ensure that the
height
dierence between the upper surfaces of all platforms does not exceed
5 mm.
NO TICE
Ensure that the concrete platforms meet requirements.
● Determine the installation position and orientation of the ESS based on site
conditions.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 4 Installation
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 70