Huawei LUNA2000-2.0MWH-1H0 - Preparations and WebUI Login

A.2.1 Preparations and WebUI Login
Prerequisites
● The operating system of Windows 7 or later is supported.
● Browser: Chrome 52, Firefox 58, or Internet Explorer 9, or a later version is
recommended.
Procedure
Step 1 Connect the network cable between the network port of the PC and the WAN or
LAN port of the SmartLogger.
Step 2 Set the IP address for the PC on the same network segment as the SmartLogger IP
address.
Connected
Port
Item SmartLogger
Default Value
Example PC
Setting
LAN port IP address 192.168.8.10 192.168.8.11
Subnet mask 255.255.255.0 255.255.255.0
Default gateway 192.168.8.1 192.168.8.1
WAN port IP address 192.168.0.10 192.168.0.11
Subnet mask 255.255.255.0 255.255.255.0
Default gateway 192.168.0.1 192.168.0.1
NO TE
● When the IP address of the WAN port is in the network segment from 192.168.8.1 to
192.168.8.255, set the default gateway to 192.168.8.1 and the IP address of the LAN
port to 192.168.3.10. If the connected port is a LAN port, you need to adjust the
network conguration of the PC.
● It is recommended that the PC be connected to the LAN port of the SmartLogger or the
GE port of the SmartModule. When the PC is connected to the GE port of the
SmartModule, adjust the network
conguration of the PC to the conguration mode
when the PC is connected to the LAN port of the SmartLogger.
Step 3 Set LAN parameters.
NO TICE
● If the SmartLogger is connected to a local area network (LAN) and a proxy
server has been set, you need to cancel the proxy server settings.
● If the SmartLogger is connected to the Internet and the PC is connected to the
LAN, do not cancel the proxy server settings.
1. Open Internet Explorer.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual A Operations on the CMU WebUI
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 174