Huawei LUNA2000-2.0MWH-1H0 - Page 183

2. Choose Tools > Internet Options.
3. Click the Connections tab and then click LAN settings.
4. Clear Use a proxy server for your LAN.
Figure A-2 LAN settings
5. Click OK.
Step 4 Log in to the SmartLogger WebUI.
1. In the address box of a browser, enter https://XX.XX.XX.XX (XX.XX.XX.XX is the
IP address of the SmartLogger) and press Enter. The login page is displayed. If
you log in to the WebUI for the rst time, a security risk warning is displayed.
Click Continue to this website to log in to the WebUI.
NO TE
– It is recommended that users use their own certicates. If the certicate is not
replaced, the security risk warning will be displayed during each login.
– After logging in to the WebUI, you can import a certicate under Maintenance >
Security Settings > Network Security Certicate.
– The imported security certicate needs to be bound to the SmartLogger IP address.
Otherwise, the security risk warning will still be displayed during login.
Figure A-3 Security risk warning
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual A Operations on the CMU WebUI
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 175