Huawei LUNA2000-2.0MWH-1H0 - Page 184

2. Specify Language, User Name, and Password, and click Log In.
Figure A-4 Login page (Initial Login When the User Name Is Displayed as
Admin)
NO TE
In this scenario, you need to update the SmartLogger to V800R021C10SPC020 or later.
Parameter
Description
Language Set this parameter as required.
User Name Default value: admin
Password – The initial password is Changeme.
– Use the initial password upon rst power-on
and change it immediately after login. Then,
use the new password to log in again.
NO TE
Updating the SmartLogger to V800R021C10SPC020 or later:
– Method 1: Log in as admin using your new password.
– Method 2: Log in as installer using your app login password (the initial password is
00000a).
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual A Operations on the CMU WebUI
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 176