Huawei LUNA2000-2.0MWH-1H0 - Installing Components

4.3 Installing Components
4.3.1 Installing the PSU
Prerequisites
● If the PSU is damaged, contact the local
oce.
● Do not put your hands into the PSU slot to avoid electric shock.
● When the PSU is running, a high temperature is generated around the air
outlet at the rear. Do not touch the PSU or place cables or other objects on it.
● Determine the PSU installation position.
CA UTION
In an outdoor scenario, power on the PSU within 24 hours after unpacking.
Otherwise, place it in a dry indoor environment without corrosive gas.
Figure 4-10 PSU installation position
Procedure
Step 1 Push the locking latch leftward.
Step 2 Pull out the handle.
Step 3 Gently push the PSU into its slot along the guide rails.
Step 4 Push the handle upward.
Step 5 Push the locking latch rightward to lock the handle.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 4 Installation
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 80