Huawei LUNA2000-2.0MWH-1H0 - Installing the Electromagnetic Valve

4.3.4 Installing the Electromagnetic Valve
Figure 4-15 Installing the Electromagnetic Valve
Procedure
Step 1 Remove the electromagnetic valve from the bracket.
Step 2 Remove the screws using a screwdriver and remove the electric control plug from
the electromagnetic valve.
Step 3 Tighten the electromagnetic valve clockwise to the top of the
re cylinder.
Step 4 Insert the electric control plug and tighten the screws using a screwdriver.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 4 Installation
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 85