Table 4-2 Verifying the installation
No. Check Item Check Method Criteria
1 Bolts and nuts Tighten the bolts
and nuts again
using a wrench.
Bolts and nuts are
tightened.
2 Check whether the doors of
the ESS can be opened and
closed properly.
Open and close
the doors of the
ESS.
All doors of the
ESS can be
opened and
closed properly.
4.2.3 Opening the Doors of the ESS
Procedure
Step 1 Use a cable cutter to cut o the TSA approved lock on the door of the control unit
cabin.
Figure 4-5 Cut
o the TSA
(1) Safety lock
(2) TSA approved lock
Step 2 Open the door, take the key from the control unit cabin, and use the key to open
the safety lock.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 4 Installation
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 76