Huawei LUNA2000-2.0MWH-1H0 - Page 127

5. Click OK.
Step 4 Log in to the SmartLogger WebUI.
1. In the address box of a browser, enter https://XX.XX.XX.XX (XX.XX.XX.XX is the
IP address of the SmartLogger) and press Enter. The login page is displayed. If
you log in to the WebUI for the
rst time, a security risk warning is displayed.
Click Continue to this website to log in to the WebUI.
NO TE
– It is recommended that users use their own certicates. If the certicate is not
replaced, the security risk warning will be displayed during each login.
– After logging in to the WebUI, you can import a certicate under Maintenance >
Security Settings > Network Security Certicate.
– The imported security certicate needs to be bound to the SmartLogger IP address.
Otherwise, the security risk warning will still be displayed during login.
Figure 8-2 Security risk warning
2. Specify Language, User Name, and Password, and click Log In.
Figure 8-3 Login page (Initial login when the user name is displayed as
admin)
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 8 SmartLogger Web-based Deployment
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 119