Huawei LUNA2000-2.0MWH-1H0 - Page 133

– Set the working mode to Scheduled charge/discharge.
Figure 8-10 Scheduled charge/discharge
Parameter Description
SOC Auto Calibration
▪ Enable:Automatic SOC calibration is
enabled. If the total charge and discharge
energy reaches the threshold or the
calibration function has not been
triggered for 30 days, the SOC automatic
calibration is performed. The SOC
automatic calibration is performed in
battery racks. During calibration, the
cut-
o SOC settings will be ineective.
▪ Disable:Automatic SOC calibration is
disabled.
6. Connect to Huawei NMS.
Figure 8-11 Huawei NMS
7. Connect to a third-party NMS.
Figure 8-12 Third-party NMS
8. Connect to third-party devices.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual 8 SmartLogger Web-based Deployment
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 125