Figure C-3 Repainting a damaged area
Step 5 Wait for 30 minutes and check whether the painting meets the requirements.
● The color of the repainted area must be consistent with that of the surrounding area.
Use a colorimeter to measure the color dierence (Δ
E
), which should be less than or
equal to 3. If a colorimeter is unavailable, ensure that there is no visible edge between
the repainted area and the surrounding area. The paint should also be free of bulges,
scratches, peeling, or cracks.
● If you choose to spray paint, it is recommended that you spray paint three times before
checking the result. If the color does not meet the requirements, paint more times until
the painting meets the requirements.
----End
Paint Supply Information
Table C-1 Painting requirements
Item
Specication
Primer thickness 60 μm
Intermediate coat thickness 120 μm
Top coat thickness 60 μm
Primer type Epoxy zinc rich paint
Intermediate coat type Zinc-rich paint
Color number of the top coat Obtain the color number based on the
color palette included with the
equipment.
The following paint model list provided by Huawei is subject to change and for reference
only. The price of paint and technical services are subject to local pricing.
LUNA2000-2.0MWH-1H0, 2H0 Smart String ESS
User Manual C Repainting the Equipment
Issue 02 (2021-11-15) Copyright © Huawei Technologies Co., Ltd. 186
To Next Page
Loading...