8.2 Installing Cables for the Rack Mounted Fire
Extinguishing System
Step 1 Take out the reserved cables and install them to the rack mounted re
extinguishing system.
Ensure that the cables are correctly installed. If a re occurs when cables are not
connected or incorrectly connected, the ESS cannot actively extinguish the re.
Figure 8-1 Connecting cables
----End
8.3 Installing Battery Pack Cables
Step 1 Install copper bars for battery packs, and connect the battery rack general output
power cable and black start cable.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 8 Installing Cables
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 107
To Next Page
Loading...