Huawei LUNA2000-97KWH-1H1 - Upgrading the Smartlogger; Upgrading the ESS

10.3 Upgrading the SmartLogger
NO TE
● If the SmartLogger software version is not the latest version in FusionSolar Software
Download, upgrade the SmartLogger and ensure that the SmartLogger software version
matches the ESM software version.
● Obtain the SmartLogger upgrade package from the Company.
Step 1 Choose Maintenance > Software Upgrade, upload the SmartLogger upgrade
package, select the device, and upgrade the SmartLogger.
Figure 10-4 Upgrading the SmartLogger
Step 2 After the software upgrade is complete, the SmartLogger automatically restarts.
Log in to the SmartLogger WebUI again 2 minutes later.
----End
10.4 Upgrading the ESS
Step 1 Choose Monitoring > ESU > Running Info., click
in the upper right corner,
and wait for 2 minutes.
Step 2 Choose Monitoring > ESR, click +, and check that all ESM status indicators under
the ESR are green or yellow.
NO TE
The quantity of ESMs displayed must be the same as the actual quantity of installed
battery packs.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 10 Commissioning the ESS (SmartLogger WebUI)
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 138