Figure 8-16 Connecting the cable
----End
8.8 Installing Communications Cables
8.8.1 Installing an FE Communications Cable
Step 1 Connect the FE communications cable to the WAN port on the CMU.
Route the FE communications cable through the magnetic rings at the cable hole to
improve signal quality.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 8 Installing Cables
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 121
To Next Page
Loading...