Figure 8-13 Connecting a ground cable
----End
8.5 Installing a DC Power Cable
Prerequisites
The DC power cable has been pre-buried.
Procedure
Step 1 Remove the bae plate in front of the power distribution area.
Step 2 Route the DC power cable through the cable hole at the bottom and connect it to
the DC circuit breaker.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 8 Installing Cables
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 118
To Next Page
Loading...