Step 2 Click in the upper right corner to start devices in batches.
Figure 10-9 System startup
----End
10.6 Deployment Wizard
During parameter setting, click Previous, Next, or Skip as required.
Step 1 Log in as installer to access the deployment wizard page.
Step 2 Click Deployment Wizard and set basic parameters.
● Set basic parameters.
Figure 10-10 Setting basic parameters
● Select a communication mode based on site requirements.
Step 3 Connect to Huawei devices.
● Click Search for Device to check the cable connections and allocate
addresses.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 10 Commissioning the ESS (SmartLogger WebUI)
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 141
To Next Page
Loading...