Step 6 Install the rack controller to the mounting bracket on the ESS.
● The M8 screws are used to secure the rack controller. Keep them properly after
removing them.
● At least three persons are required to install the rack controller.
Figure 7-30 Installing the rack controller
----End
7.4.4 Installing the Smart PCS
Prerequisites
Unpack and check the Smart PCS delivered to the site to ensure that the Smart
PCS is complete and intact.
Procedure
Step 1 Install the mounting bracket. The mounting bracket is delivered with the Smart
PCS.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 7 Installation
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 100
To Next Page
Loading...