Figure 10-14 Huawei NMS
Step 8 Connect to a third-party NMS and select IEC104.
Figure 10-15 Connecting to a third-party NMS
Step 9 Connect to third-party devices.
Figure 10-16 Third-party devices
Step 10 The conguration is complete.
----End
10.7 Checking Alarms
Step 1 Check whether an alarm is generated on the SmartLogger WebUI or CMU WebUI.
If an alarm is generated, handle the alarm by referring to the handling
suggestions in the alarm reference section.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 10 Commissioning the ESS (SmartLogger WebUI)
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 153
To Next Page
Loading...