EasyManua.ls Logo

Huawei LUNA2000-97KWH-1H1 - ESS Installation Check

Huawei LUNA2000-97KWH-1H1
209 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
No. Check Item Expected Result
6 Switch The DC LV Panel switch is set to OFF.
The battery rack switch is set to OFF.
9.1.2 ESS Installation Check
Cabinet
No. Check Item Expected Result
1 Installation The installation meets the design
requirements.
The cabinet is level, and each door
opens normally.
2 Appearance The cabinet surface is free from cracks,
dents, and scratches. If the paint akes
o, repair the damaged paint.
3 Cabinet grounding Each cabinet has at least two ground
points and is grounded securely. The
resistance of a bond shall be less than
or equal to 0.1 ohms.
4 Accessory The number and positions of external
accessories installed meet design
requirements.
5 Label All labels are correct, clear, and
complete.
Interior
No.
Check Item Expected Result
1 Circuit breaker The circuit breakers are OFF.
2 Copper bar The copper bars are not deformed, and
there are no foreign objects on the
copper bars.
3 Cable The bolts for installing the cables are
tightened and the cables are not loose.
4 Cable hole sealing Cable holes are sealed.
5 Battery pack All battery packs are intact.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 9 Powering On the ESS
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 128

Table of Contents

Related product manuals