reviewed based on the installation environment, geological features, and
seismic resistant requirements of the project site.
5.4 Forklift Requirements
● Do not move the ESS after battery packs are installed.
● Before using a forklift, ensure that the forklift has a load-bearing capacity of
at least 2 t.
● It is recommended that the length of the tynes be greater than or equal to
1.2 m, the width be 80 cm to 160 cm, and the thickness be 25 cm to 70 cm.
● Lifting height of a forklift: If the foundation is less than or equal to 0.3 m
high, the lifting height shall be greater than or equal to 2 m. If the foundation
is greater than 0.3 m high, the lifting height shall be increased accordingly.
5.5 Hoisting Requirements
● Before hoisting, ensure that the crane and hoisting ropes meet the load-
bearing requirements.
● When installing or removing the hoisting equipment, do not drag it on the
cabinet to prevent scratches.
● Do not hoist or move the ESS after battery packs are installed.
Stage
Precautions
Before hoisting Crane hoisting capacity ≥ 2 t, working radius ≥ 2 m. If the
onsite environment does not meet the required working
conditions, ask a professional to assess the conditions.
Only trained and qualied personnel are allowed to perform
hoisting operations.
Check that hoisting tools are complete and in good
condition.
Ensure that the hoisting tools are secured to a load-bearing
object or wall.
When the equipment is used outdoors, it is recommended
that you hoist the equipment when the weather is good and
there is no wind.
Ensure that the crane and steel ropes meet the
requirements before the hoisting.
All doors of the equipment are closed and locked.
Ensure that the steel hoisting ropes are securely connected.
It is recommended that the equipment be hoisted from left
to right or from right to left.
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 5 Site Requirements
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 74
To Next Page
Loading...