Figure 8-20 Removing the fastener
Step 3 Connect one end of the optical jumper to the ber adapter.
Step 4 Route the other end of the optical jumper through the cable hole on the side of
the ATB, and connect the cable to the ATB.
Step 5 Connect the peripheral optical ber cable to the ATB, splice the optical ber cable
and the optical jumper, and then wind the spliced cable around the ber spool on
the ATB.
Figure 8-21 Connecting optical ber cables
Step 6 Check that the cables are connected correctly and securely. Then reinstall the
optical ber cable fastener and external mechanical parts.
----End
LUNA2000-(97KWH-1H1, 129KWH-2H1,
161KWH-2H1, 200KWH-2H1) Smart String ESS
User Manual 8 Installing Cables
Issue 10 (2023-11-07) Copyright © Huawei Digital Power Technologies Co., Ltd. 124
To Next Page
Loading...