Huawei OceanStor V5 Series

To Next Page

To Previous Page

If any items fail the inspection, rectify the faults by performing the recommended

actions in the inspection reports. Ensure that all other parts except the parts to be

replaced are working properly.

2. Check the status of the parts to be replaced.

Start SmartKit and choose Home > Storage > Parts Replacement > More >

Parts Replacement (CRU). On the CRU replacement page, complete the

check before the replacement as prompted. For details, see 6.1.3 Replacing a

CRU.

NO TICE

You can proceed to next steps only when all items pass the pre-replacement check

and the replacement page is displayed. If any item fails, rectify the fault as

prompted.

Step 2 Wear an ESD wrist strap.

Step 3 Press latches on the expansion module to release the handles and pull out the

expansion module, as shown in Figure 6-109.

Figure 6-109 Removing an expansion module

OceanStor V5 Series

Parts Replacement 6 Replacing CRUs

Huawei OceanStor V5 Series - Page 124