Huawei OceanStor V5 Series

To Next Page

To Previous Page

Figure 7-28 Positions of the nameplate, Huawei logo label, product model label,

and Intel label

● Two dierent nameplates are often included upon the product delivery. Please select the

one that contains identical information to the nameplate on the removed system

subrack.

● When attaching the product model label and Intel label, attach the product model label

rst and then attach the Intel label under the information on the product model label.

Step 7 Optional: Pull the information plate out of the system subrack. (If you face the

front part of the system subrack, the information plate is located at the upper

right of the enclosure, as shown in Figure 7-29. Gently pull the information plate,

but not away from the enclosure.) Attach the device information label to the

information plate. Then, push the information plate back to the enclosure.

Figure 7-29 Position of the information plate

You can attach the device information labels to both the front and back of the information

plate. The label content and positions must be the same as those on the replaced system

subrack. If a label has been attached to one side of the information plate, you only need to

attach the device information label with a QR code to the other side of the information

plate. Attaching the device information plate helps engineers more easily identify and

maintain devices.

OceanStor V5 Series

Parts Replacement 7 Replacing FRUs

Huawei OceanStor V5 Series - Page 172